How To Lower Bass On Windows 10

Download Commodity

Download Article

This wikiHow teaches you how to raise or lower the amount of bass in your computer'southward speaker output. Windows has a congenital-in Bass Boost audio enhancement. Withal, it may non be available on all devices, depending on the quality of your speakers. On Mac, some apps like Apple Music have a built-in blaster that allows you to adjust the bass. Both Windows and Mac accept tertiary-political party equalizer apps yous can use to arrange the bass on your system.

1

Click the Windows Showtime button . It's the icon with the Windows logo in the lower-left corner.
two
Type Audio and click Sound Settings . Information technology's the first option at the elevation of the Windows Starting time menu. The opens the Sound Settings menu.
- Alternatively, you can find this carte du jour in the Settings menu by click System followed by Sound on the left. You tin also correct-click the speaker icon in the taskbar and click Open Sound Settings.
Advertisement
three

Click Sound Command Panel . It's below "Related Settings" to the right. This opens Sound Settings in the Control Panel.
4
Double-click your audio device. This may exist your speakers, headphones, HDMI-out, or other audio devices. Double-click whichever device you are using for your for your audio output.
- You may commencement take to click the Playback tab in the upper-left corner of the Sound window.
5
Click the Enhancements tab. It's at the peak of the Backdrop window for your sound output device.
- The Enhancements tab is not available for all audio devices. For instance, Enhancements may not be available for laptop speakers All the same, it may be available if y'all connect a pair of speakers or headphones either via the 3mm headphone jack or via Bluetooth.
6

Click the checkbox [[windows|checked}} adjacent to "Bass Heave." It'due south the offset option in the listing of enhancements. This enables Bass Heave for your device.
7

Click Bass Boost and click Settings (optional). You can adjust the settings for individual enhancements. To conform the Settings for Bass Heave, click Bass Heave so that information technology is highlighted and click Settings at the bottom of the window.
8
Adjust the frequency and boost level and click Ok . The frequency determines what part of the audio spectrum receives a heave. Boost level determines how much the frequency is increased. Use the drop-downward menus to select the frequency and heave level. Click Ok when you lot are done.
- l-75Hz is usually within the sub-bass range. 75-250HZ is the bass range. 250-500Hz is within the lower midrange. And 500-600Hz is within the mid-range settings.^[1]
9

Click Apply . This applies your audio enhancement settings. You tin can now click Ok to close the window.

Advertisement

ane
Open the Apple Music app. Information technology has a ruddy icon with a music annotation in the middle. Click the Apple Music icon in the Dock or in the Applications folder to launch Apple Music.
- Audio adjustments in Apple Music just apply to Apple tree Music. They do not apply to other apps on your Mac.
ii

Click Window . It'southward in the bill of fare bar at the pinnacle of the screen.
3

Click Equalizer . This opens the equalizer for Apple tree Music.
4

Click the checkbox next to "On." . This turns the blaster on and applies the settings to your music.
5
Elevate the slider confined on the left up. The slider bars on the left control the bass frequencies. The slider bars in a higher place 32 and 64 control the sub-bass frequencies. The slider bars above 125 and 250 control the bass frequencies. The slider bars above 500 control the mid-range frequencies.
- Alternatively, y'all can select one of the presets using the drop-down menu at the meridian.
Advertizing

1
Download and install Blaster APO. Blaster APO is a free equalizer you can download for Windows. Yous will need to restart your computer after the installation procedure. Equalizer APO may not work with some audio devices, such every bit laptop speakers. Even so, it will piece of work with headphones or external speakers. Apply the post-obit steps to download and install Equalizer APO:
- Go to https://sourceforge.internet/projects/equalizerapo/ in a web browser.
- Click the green button that says Download.
- Click the EqualizerAPO64-1.2.1.exe file in your Downloads binder or spider web browser.
- Click Yes to permit the Equalizer APO to modify your organisation.
- Click Adjacent to begin the installation process.
- Click I agree to agree to the terms and atmospheric condition.
- Click Browse to select an install location (optional) and click Side by side to proceed.
- Click Install.
- Click the check box next to all audio devices you want to use Equalizer APO with and click Ok.
- Select Reboot now and click Finish.
2
Download and install the PEACE extension. PEACE is an extension for Blaster APO that adds a more than user-friendly interface. It likewise has additional features, such as preset equalizer settings and the ability to add together proceeds to bass frequencies. Employ the following steps to download and install PEACE:
- Go to https://sourceforge.net/projects/peace-equalizer-apo-extension/ in a web browser.
- Click the green push button that says Download.
- Click PeaceSetup.exe in your Downloads folder or spider web browser.
- Click Aye to allow PEACE to make changes to your system.
- Click Install.
- Click Aye to complete the installation.
3

Open PEACE. PEACE has a bluish icon that resembles a peace sign with two lines off to the side. Click the icon in your Windows Start bill of fare to open PEACE.
four

Click the image beneath "Full Interface." Information technology's the image on the right. This opens the total interface with all features.
5
Adjust the equalizer. Motility the slider bars on the left up to adjust the bass frequencies.
- The slider confined below "10" and "21" control the sub-bass frequencies on your figurer. The slider bars below "42" and "83" control the bass range frequencies. The slider confined below "83" and "166" control the low-mid range frequencies. And the slider bars beneath "333" and "577" control the mid-range frequencies.
- Alternatively, you lot tin can click one of the pre-saved settings in the box in the lower-left corner to load it. Try Bass Boost or Bass Boost 2 for instance.
- Equalizer APO and PEACE may non work on all sound output devices (laptop speakers for example). If you don't hear whatsoever changes when adjusting the equalizer settings, try connecting a headset or pair of speakers.
half-dozen

Click Furnishings (optional). If you lot want to enhance the bass further, you can add some more than gain to the bass under Furnishings.
vii

Turn the Bass proceeds knob up. Click and drag the Bass gain up to turn it up. this adds more than gain to the bass frequencies.
8
Adjust the bass frequency knobs. The adjust which frequencies the bass gain is practical to.
- Between 0 - 75Hz controls the sub-bass frequencies. 75Hz - 250Hz controls the bass frequencies. 250-500Hz controls the depression-mid range frequencies. 500-600Hz controls the mid-range frequencies.
Advertisement

i

Go to https://eqmac.app in your computer's web browser. This is the website that allows you to download eqMac. It is an equalizer you tin download for your Mac audio system.
2

Click Download . It'due south the green button at the top of the page.
iii
Install eqMac. You will demand to restart your Mac to stop the installation. Once eqMac finishes downloading, do the following to install it:
- Double-click the eqMac.pkg file in your Downloads folder or web browser.
- Verify the installation if prompted.
- Click Go along.
- Click Proceed to install on the Mac hard drive.
- Click Install.
- Click Close applications if asked to close any applications earlier continuing.
- Enter your password and click Continue.
- Click Restart Mac to restart your Mac.
4

Open Launchpad. It's the rocket-shaped icon in your Mac's Dock.
5
Click the eqMac icon. It has a dark-green icon that resembles a sound wave. Click the icon to open eqMac.
- You might have to scroll left or right to find the eqMac icon.
- Y'all may as well take to click Open after clicking the icon.
- If you are asked if you lot want to transport crash reports and analytic information, click Accept All to agree to everything.
six
Turn the Bass knob to the left. To plow upwards the bass knob, click it and drag it in a clockwise round management. This boosts the bass for your Mac system.
- Alternatively, you lot can click Advanced higher up the knobs and apply the slider bars on the equalizer to adjust the frequencies. The slider confined on the left are used to command the bass frequencies. The ones furthest to the left adjust the everyman frequencies. The slider bars above 32 and 64 control the sub-bass frequencies. The slider bars higher up 125 and 250 control the bass frequencies. The slider bars above 500 control the mid-range frequencies.
- If yous desire to save your settings, click the plus (+) sign above the knobs or equalizer and enter a name for your settings. And so click Salve.
Advertisement

Add New Question

Question

Volition changing the EQ on Windows Media Player affect all sounds (as in every single audio any program makes)?

No, that will affect just the Media Role player'southward sound settings.
Question

How does one go all those options when opening Equalizer APO? It's a bare screen for me, and I don't know how to get it to the point that your screenshot is.

Aliawilson

Customs Answer

Open Volume Mixer on your Taskbar. Click on the picture of the speakers, click the Enhancements tab, and select Bass Booster. If you want to increment it more, click on Settings on the same tab and select the dB Boost Level.
Question

I do not see an option for the blaster on my Windows x version. What should I do?

The settings depend on the audio commuter. If the Windows 10 driver does not support equalizing, there volition not be a tab under advanced. There may be a tone tab that has bass and treble, yet.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertizing

Premium audio programs, while sometimes expensive, provide greater command over your computer's audio levels. Such programs include Graphic Equalizer Studio for PC and Boom 2 for Mac.
To boost the bass using an blaster, try raising the bar that' furthest to the left the highest. Then ready the rest of the slider bars to the correct and then that they are slightly lower than the previous one to the left until they tapper off in the centre then that the mid-range and treble slider bars on the right grade a straight line.
Adjusting bass requires some trial-and-error. Don't be afraid to test different settings.

About This Article

Article Summary X

1. Install a blaster app such as Equalizer APO for Windows or eqMac for Mac.
2. Open up the equalizer app.
3. Plough upwardly the bass knob or utilise the slider confined on the left side of the equalizer to increase the bass frequencies.

Did this summary assist yous?

Thanks to all authors for creating a page that has been read ane,234,965 times.

Is this article upwards to date?