How To Apply Non Sideslip Pigment

When selecting your floor paint, it is of import to know the divergence between a 'Non-Slip' paint and a 'Slip Resistant' paint.  Whilst it could be argued that they both mean the same affair, it is generally agreed within the trade that a 'non-sideslip' paint is more aggressive than a slip resistant paint. The more 'slip resistant' the paint, the easier it will collect the clay and the harder it is to clean.

A 'Not-Sideslip' surface can take anything from 2 times to 10 times every bit much amass as a 'slip resistant' blanket would accept.  So in club to accomplish a truly not-skid surface, we recommend that you lot cover the surface with 2kgs of aggregate per square metre. Alternatively, to accomplish a slip resistant surface, yous can add merely 0.5kg of aggregate to a 5L unit of paint covering a total of xxx square metres.

5 important considerations when purchasing your paint and amass:

  • The applicator must decide upon the amount of aggregate to add to accomplish the amount of slip resistance required.
  • A lot of people do not demand a sideslip resistant surface everywhere and tin can, therefore, determine each area differently. For instance, in a manufacturing plant, it may only be a sink or machine. When used on a staircase, it may only be used around the nosing of the step. Information technology is not recommended to apply a non-skid paint under a sink or auto equally this could make your cleaning routine far harder to maintain.
  • The benefit of only dissemination the amass exactly where you need it is that the paint is effectively exactly the same colour throughout.
  • The size of the aggregate tin can also be altered.
  • The colour of the aggregate can also be varied from a contrasting or decorative color to a clear aggregate for areas where the existing advent is non distorted/altered.

While aggregates are normally supplied in 'Non-Slip Paints', the aggregate commonly used is a very dense polystyrene. This usually results in the non-slip flooring losing it'southward safety capabilities as quickly as three months later on application. To combat this, nosotros recommend using industrial aggregate and mixing it in with your chosen pigment. Hither'due south how:

Mixing In The Aggregate

This is just really suitable when using fine aggregates of 0.5mm and nether.  The reason for this is that the aggregates have a trend to sink to the lesser of the paint tin and therefore it is important that the production is not only thoroughly mixed in the commencement identify but it is important to 'dig deep' with the roller into the pigment tray in order to constantly agitate the coating and amass together.

The benefit of applying the coating this way is that ane tin achieve an even end and with less amass over a much larger expanse.  Furthermore. you lot tin can apply a finely textured surface that has a degree of slip resistance but also one that you can easily mop clean –  especially ideal in the toilet, bath, kitchen and nutrient preparation areas.

Broadcasting Aggregate By Hand

Although dissemination the aggregate by paw is a very pop method, corking intendance needs to be taken in club to accomplish an even cease. Most people use the aggregate from a quick swish of the manus similar to feeding the chickens. Washed properly, this is extremely successful and is a fast style of accomplishing the task. We recommend that extra care is taken when spreading the amass around to make it as evenly distributed as possible.

If you lot adopt, you can utilise a  much smaller handful and spread by applying it over a 'big' area in more than than one application; spread a small corporeality over a big area and then utilize more than and more than until the level of slip resistance is achieved.

Top Tips:

  • When broadcasting the aggregate, make sure that this is completed whilst the pigment is notwithstanding wet. The post-obit day, brush off whatever excess/loose aggregate and apply the second coat in order to encapsulate the aggregate. If the paint is immune to dry earlier the aggregate is applied, the aggregate will simply non adhere and will brush off/fall out!
  • If you would similar the aggregate to exist seen, apply the aggregate to the second/height coat instead. To use this method, it is important that you exercise accept plenty thickness of paint in gild to hold the aggregate- the bigger the amass, the thicker the blanket needs to be.

For professional floor advice, talk to ane of our 'Polycote Pros' today on 0800 980 0852, go a quick reply from our team via Alive Chat or email us at [e-mail protected]

Back to Production Articles